For homes and rentals
We handle running toilets, leaks at the base, and clogs in houses and rental units. We agree a visit time that works for the tenant and the owner.
- Running toilet
- Leak at the base
- Clogged or backed up
Toilet repair is the professional fixing of a running, leaking, or weak-flushing toilet in a Mount Pleasant, TX home. A toilet that runs all night wastes water and keeps the household awake. NTP Plumbing repairs toilets across Mount Pleasant, TX — flappers, fill valves, wax rings and flush valves — and checks the shutoff and supply line while we are there. Open 24 hours, Monday through Sunday.
Running fixedFlush restoredNo more leaksEvery toilet repair visit includes a full diagnosis, the repair itself, and a flush test before we leave. We tell you upfront if a part isn't in the truck or if the job needs something beyond a standard repair, like a flange replacement or a drain line clearing.

We check the fill valve, flapper, flush valve, tank bolts, supply line, shutoff valve, wax ring, and closet flange. That's the whole fixture, not just the part that's obviously broken.
Flappers, fill valves, wax rings, closet bolts, supply lines, and shutoff valves are standard stock. We use name-brand parts that fit your toilet.
If the toilet is backing up, we clear the trapway with a plunger or closet auger. If the clog is deeper, we run a drain snake into the branch line to clear it at the source.
Three full flush cycles, a tank refill check, and a dry-rag test at the base and supply connection. We don't leave until the floor stays dry and the flush is strong.
We wipe down the fixture and floor, bag the old parts, and take them with us. Your bathroom looks the way it did before we started, minus the leak.
A running toilet and a rocking toilet are different repairs — one is tank parts, the other is the flange and the floor — but the checks at the end are the same in a home and a rental. What changes is the access, the schedule, and who needs the paperwork for a toilet repair job.
We handle running toilets, leaks at the base, and clogs in houses and rental units. We agree a visit time that works for the tenant and the owner.
We repair toilets in rental homes and multi-unit properties. Property managers get a written summary of the work for the file.
A plain-language look at what Toilet Repair involves and when it is needed. The City of Mount Pleasant charges a $75 residential plumbing permit fee where a permit is required (inside city limits) — that is a City fee, not our price.
See how it worksMost toilet repairs are small parts doing a big job badly. A flapper that no longer seals lets the tank drain into the bowl all day; a fill valve that will not shut off keeps the tank overfilling into the overflow tube; a wax ring that has dried out lets water seep at the base with every flush. Each one is diagnosable in minutes and usually fixed while we are there.
The jobs we see most in Mount Pleasant, TX are running toilets in older homes — Downtown houses and Southgate ranches where the internals are original — and rocking toilets where the flange or the floor has given a little. A toilet that rocks needs the flange checked, not just a new wax ring, or the leak comes back. Work follows the 2024 International Plumbing Code adopted by the city, and a toilet replacement is one of the few jobs the state exempts from the city permit requirement.
A running toilet is a small part failing loudly. Fix the part and the silence follows.

From the first phone call to the final flush test, here's exactly what happens when you book us.
We ask what the toilet is doing: running, rocking, backing up, or leaking at the base. That tells us what parts to load and whether to bring a drain snake or sewer camera. Most calls get a visit time agreed on the call, and emergency calls get priority.
The tech shuts off the supply, drains the tank, and checks the fill valve, flapper, and flush valve. We rock the bowl to test the flange, look for water staining at the base, and check the shutoff valve. This tells us exactly what the repair needs.
We replace what's worn: flapper, fill valve, wax ring, supply line, or closet bolts. If the clog is downstream, we run a drain snake or hand auger through the trapway and into the branch line. Parts are name-brand and matched to your toilet.
We run three full flush cycles and watch the tank refill, the bowl level, and the base for moisture. The tech checks the supply connection with a dry rag and confirms the shutoff valve holds. Nothing gets packed up until the floor stays dry.
We wipe down the tank, bowl, and floor, haul off the old parts, and walk you through what failed and why. You get a plain explanation of what to watch for and how to keep the same problem from coming back.
Move across a circle, or focus it and press Enter, for an illustrative thermal view of this toilet repair photograph.

Clears clogs in the trapway without scratching the porcelain. It's the first tool we reach for on a backed-up toilet.

Reaches clogs past the trap and into the branch line. We use it when a plunger and auger don't clear the blockage.

Confirms whether a repeat clog is caused by root intrusion, a collapsed pipe, or a belly in the line before we recommend a repair.

Used on supply lines, shutoff valves, and tank bolts. A proper wrench prevents overtightening and cracked porcelain.

Finds hidden leaks behind walls or under floors when a toilet leak isn't obvious at the base.
Thermal views are illustrative, generated from photographs of toilet repair work in Mount Pleasant, TX.
Checks water pressure at the fixture. High pressure wears out fill valves and supply lines faster than normal.
Used for quick, reliable supply line repairs when a shutoff valve or line needs replacing without soldering.
We set wax rings, flanges, and supply connections to code so the repair holds up to inspection and doesn't create a liability down the road.
When we replace a fill valve or flapper, we use WaterSense-rated parts that match the fixture's flush volume. That keeps water use where it should be and avoids short-cycling.
Every repair ends with three full flush cycles and a dry-rag check at the base and supply line. If there's a slow weep, we find it before we leave.
If a toilet backs up more than once in a few months, we run a sewer camera before recommending a repair. That prevents us from clearing the same clog a third time.

We replace the flapper and fill valve, clean the valve seat, and set the tank level.
Outcome: Silence, and a bill back to normal next cycle.

The toilet rocks when you sit down and the floor is damp at the base.
The flange was cracked and the wax ring had failed. We replaced the flange and ring and re-seated the bowl.
Outcome: A solid bowl and a dry floor.

The toilet flushes weakly and needs two flushes every time.
The rim jets were scaled shut and the flapper was closing too fast. We cleared the jets and fitted a flapper matched to the tank.
Outcome: One flush, every time.

A rental toilet runs and the new tenant has already called.
We coordinated access with the property manager, replaced the fill valve and flapper, and checked the shutoff while we were there.
Outcome: A quiet toilet ready for move-in day.

Water appears at the base of the toilet after every flush.
The wax ring had dried out. We pulled the toilet, fitted a new ring, and checked the flange before re-seating it.
Outcome: A dry floor and a flush that stays where it belongs.

Running toilets are the number-one toilet call in town, and they skew old: Downtown homes from the 1940s–1980s and Southgate's 1970s ranches still run their original internals. In newer Northwood and Stone Briar homes the fault is usually a single flapper or a fill valve that sticks.
Rocking toilets are the second call, and they follow the clay: East Texas clay moves with wet and dry cycles, and a slab that shifts a fraction leaves a toilet rocking on its flange. If your toilet runs constantly, our post on why a toilet runs constantly and how to stop it walks through the checks — and when to call us.
Example — a typical call. The stories below are illustrative examples of the kind of toilet repair calls we take, not a record of a specific past job.

Before: The flapper was warped and the fill valve was scaled up from hard water. The tank never shut off completely.
After: We replaced the flapper and fill valve, cleaned the valve seat, and set the tank level to the correct mark. Three flush cycles confirmed the refill stopped each time.
Check the flapper every six months for warping or scale. A water softener reduces the mineral buildup that wears out these parts.
Before: A customer in Downtown Mount Pleasant, TX noticed water seeping from under the toilet after every flush. The wax ring had failed and the closet flange was cracked. The subfloor was damp but not yet rotted.
After: We pulled the toilet, installed a repair ring on the flange, set a new wax ring, and reset the fixture with new closet bolts. A full flush test showed no moisture at the base. The floor stayed dry.
Avoid rocking the toilet when you sit, and check the base for moisture once a season. A loose toilet breaks the wax seal fast.
Before: A property manager in the US 271 retail corridor had the same toilet backing up every few weeks. Plunging cleared it temporarily, but the clog kept returning. The branch line was partially blocked.
After: We ran a drain snake through the branch line and pulled out a buildup of paper and scale. A follow-up camera check confirmed the line was clear.
Use single-ply paper and avoid flushing wipes. If the same toilet clogs twice in a season, get the line camera-checked before it backs up again.
Most of the calls we get fall into a handful of categories. Here's what we see and how we handle it.
A proper repair stops the leak, lowers the water bill, and protects the floor.
A running toilet can waste a lot of water every day, which shows up fast on a Mount Pleasant utility bill. We replace the fill valve and flapper, set the tank level correctly, and confirm the refill stops.
A leaking toilet usually means water is already creeping under the vinyl or tile. We pull the toilet, inspect the flange, and set a new wax ring so the seal is dry. Catching it early saves subfloor replacement.
We stock flappers, fill valves, wax rings, supply lines, and closet flange repair rings on the truck, so most repairs are finished while we are there instead of needing a diagnosis trip and a return trip.
We tell you what's wrong, what it takes to fix it, and what it costs before we turn a wrench. If the flange is cracked and the fixture is old, we lay out both options and let you choose.
Clear records from your toilet repair job that you can keep and share.
What was replaced and why
Parts used on the repair
Photos of the flange and seal
What to watch for later
Most toilets can be repaired. The decision comes down to fixture age, flange condition, and water use.
Fixing the worn part on a sound fixture
Installing a new fixture when repair won't hold
Moving to a high-efficiency fixture
A list like this tells people straight away whether we cover their street for toilet repair. Not listed? Call and ask — it only takes a minute.
Based in Mount Pleasant and covering the places around it. Pick one for local details.
Usually a flapper that no longer seals, so the tank drains into the bowl and the fill valve keeps topping it up. A worn fill valve can do the same. We find which part has failed and replace it — the fix is usually finished while we are there.
Yes. A rocking toilet usually means the flange is damaged or the floor has moved — common where East Texas clay shifts. We check the flange and the floor, not just the wax ring, so the leak does not come back.
Yes. A toilet that runs all day can waste a lot of water every day — it is one of the biggest hidden water users in a house, and it shows up on the bill within a cycle.
No — state law exempts water-closet replacement and the small repairs around it from the permit requirement. Larger plumbing work in the city follows the 2024 International Plumbing Code (Ordinance 2026-2, effective 20 January 2026).
Other services from the same team.
Call (903) 350-9085 and tell us what the toilet is doing. We will fix the failed part and check the base for leaks. Open 24 hours, Monday–Sunday.
Call (903) 350-9085 any time — NTP Plumbing is open 24 hours, Monday–Sunday. Tell us what you are seeing and we will talk you through shutting the water off if you need to. We serve Mount Pleasant, TX, including ZIP codes 75455 and 75456.