Leak repair is the professional fixing of a water leak in a Mount Pleasant, TX home, from a dripping stop to an under-slab break. Leak repair in Mount Pleasant, TX for slab leaks, pipe leaks, and hidden leaks behind walls and under floors. Spot repair or reroute — we fix the line and test it before we close anything up. Call NTP Plumbing at (903) 350-9085 — open 24 hours, Monday to Sunday, for leak repair.
A leak repair starts with a located leak, not a guess. Here is what comes standard on a Mount Pleasant, TX leak repair visit.
Slab leak repair
We repair the leaking line under the slab through a small opening, or reroute it through the walls or the attic when breaking concrete is the worse call for an older home.
Pipe leak repair
We cut out the failed section of a supply line and replace it with new pipe and code-approved fittings, sized and installed to the 2024 International Plumbing Code.
Hidden wall leak repair
A leak behind a wall is repaired through a small opening at the marked spot, not a guess — and the wall is left ready for patching.
Water service line repair
A leak in the line from the meter to the house is repaired at the failed section, and the line is tested before we cover it back up.
Shutoff valve replacement
A corroded shutoff valve that will not close is replaced along with the repair, so the next leak can be stopped at the fixture instead of the main.
Homes and rentals in Mount Pleasant, TX
A slab leak under the floor in a home you live in and a service-line leak in a rental yard both need the same thing first: the failed section fixed and the line tested before anything is closed up. What changes is who meets us at the door, who gets the repair note, and whether the fix is a spot repair or a reroute.
For homes and rentals
Homes and rentals get the same repair: the failed section replaced, the line tested, and the area left clean. We explain the fix before we start.
Slab leak under the floor
Pipe leaking behind a wall
Service line leaking in the yard
For property managers and landlords
Property managers and landlords need the leak fixed and the work documented. We repair the line, test it, and photograph the work so the work order is easy to close.
Leak reported by a tenant
Slab leak in a rental unit
Service line leak at a duplex
What leak repair in Mount Pleasant, TX actually involves
A plain-language look at what leak repair involves and when a reroute beats breaking concrete. The City of Mount Pleasant charges a $75 residential plumbing permit fee where a permit is required (inside city limits) — that is a City fee, not our price.
The job starts with a located leak, and the fix follows the pipe that failed. A slab leak found by acoustic and thermal methods, a wall leak marked at the spot, or a service-line leak narrowed down to a section — each one calls for a different repair: cut out the failed section at the fitting or elbow and replace it with new pipe, open a small slab cut for an under-slab break, or reroute the line through the walls or the attic when breaking concrete is the worse call for an older home. Leak repairs follow the 2024 International Plumbing Code Mount Pleasant adopted under Ordinance 2026-2, effective 20 January 2026, with the failed section replaced to code, not patched over. Permits are handled when required. When the leak has not been located yet, the first step is a leak detection visit.
The pipe the era left you decides the repair. The citywide median build year is 1978, and much of the in-town stock sits on slab-on-grade foundations over East Texas clay that swells when wet and shrinks when dry — movement that fatigues rigid pipe joints and pits buried copper in low-pH soil, so under-slab lines fail at joints, elbows, and fittings first. Homes built from the 1940s to the 1960s commonly have galvanised supply lines corroding internally, and 1980s–90s homes can carry polybutylene that microfractures at fittings — so a repair that fixes one joint can leave the next one to fail, which is why we explain the reroute option when the lines are old. The roughly 50 to 60 freezing nights a year add their own failures: a pipe in an attic or an exterior wall splits at the freeze and shows up at the thaw. Our guide to preventing frozen pipes explains how to protect exposed lines before the next hard freeze.
A leak repair is about the right fix for the home — a spot repair when the line is sound, a reroute when it is not.
When you need it
When a leak has been located and the line needs fixing — or water is actively damaging the house.
What to expect
A repair of the failed section or a reroute, a pressure test, and a walkthrough before we leave.
Permits and code
Work on leak repair follows the 2024 International Plumbing Code adopted by Mount Pleasant (Ordinance 2026-2, effective 20 January 2026); permits are handled when required.
What to expect when you call
A leak repair should feel like a plan, not a panic. Here is the sequence from your first ring to a tested, dry line.
Call and describe
Tell us where the leak was found, whether the water is off, and whether the line is under a slab, behind a wall, or in the yard. That tells us whether the repair is a spot fix or a reroute.
Leak located
Water status checked
Visit set
Confirm the location
We confirm the leak location with a pressure test and the listening methods, so the repair targets the leak — not a guess about where it might be.
Pressure tested
Location confirmed
Repair planned
Explain the fix
We explain whether a spot repair or a reroute is the better call for your home, and what the repair involves. You hear the plan before anything is opened up.
Options laid out
Plan agreed
Work starts
Repair and test
We cut out the failed section and replace it with new pipe, or reroute the line through the walls or the attic. The line is pressure-tested before we close anything up.
Section replaced
Line tested
Area cleaned
Walkthrough and next steps
Before we leave, we show you what we fixed, how to shut the water off at the fixture, and what to watch — including whether the rest of the line needs watching, or a repipe is the better long-term call.
Walkthrough done
Shutoff shown
Next steps set
Tools and methods we bring to the job
The repair depends on where the leak is and how old the line is. Here is what we use on leak repairs in Mount Pleasant, TX.
Acoustic listening
Listening methods that confirm the leak location before anything is opened, so the repair starts at the right spot.
Thermal imaging
Temperature patterns that help confirm a hot-water leak under a floor or inside a wall before the repair starts.
Pressure gauge
Confirms the repaired line holds under pressure, and shows whether the rest of the system is holding too.
Pipe cutter and crimping tools
Makes code-correct connections on PEX tubing and copper pipe, so the repair holds under pressure.
Moisture meter
Checks walls and floors for damp that has not yet shown on the surface, so the damage is found before the repair is closed up.
Thermal views are illustrative, generated from photographs of leak repair work in Mount Pleasant, TX.
Methods
Spot repair vs reroute
For an older home, rerouting a line through the walls or the attic is often the better call than breaking concrete. We explain both options when the leak is found.
Pressure testing before close-up
We test the repaired line under pressure before closing a wall or floor. If it does not hold, we find out while the access is still open, not after.
2024 International Plumbing Code
Every leak repair is sized, vented, and installed to the code Mount Pleasant adopted under Ordinance 2026-2, effective 20 January 2026.
Shutoff valves replaced
A corroded shutoff valve that will not close is replaced along with the repair, so the next leak can be stopped at the fixture.
Freeze protection checked
A pipe that split at a freeze gets its exposed runs checked, so the next hard freeze does not split the next section.
When to call for leak repair
Slab leak, spot repair
A hot-water line leaks under the slab, and the floor has a warm spot.
We confirm the location with acoustic and thermal methods, open a small section of floor, and replace the failed length of pipe.
Outcome:The leak stops, the line holds at pressure, and the repair stays small instead of turning into a full slab break-out.
Slab leak, reroute
A slab leak is found in a 1960s home, and the lines under the slab are old galvanised pipe.
We explain the options and reroute the line through the walls and the attic instead of breaking concrete over an old line that will fail again.
Outcome:Hot water is back, the floor stays intact, and the new line is accessible if it ever needs work again.
Wall leak, small opening
A homeowner hears running water behind a bathroom wall when every tap is off.
We confirm the leak location with pressure testing and listening, then open the wall at the marked spot and replace the failed section.
Outcome:The leak is fixed through a small opening, and the wall is left ready for patching.
Service line leak
The meter runs with every tap off, and the yard has a soggy spot near the house.
We narrow down the service line leak to a section and replace it, then test the line before covering it back up.
Outcome:The meter stops running with the taps off, and the yard dries out.
Freeze split, repaired and protected
A pipe in an attic splits at a hard freeze, and the damage shows up at the thaw.
We replace the split section, check the rest of the run for weak spots, and check the exposed lines for protection.
Outcome:The line holds at pressure, and the homeowner knows where the main shutoff is for the next freeze.
SouthgateDowntown Mount PleasantEastwood Hills
How leak repair runs in Mount Pleasant, TX
Mount Pleasant, TX leaks follow the ground and the pipe. Much of the in-town stock sits on slab-on-grade foundations over East Texas clay that swells when wet and shrinks when dry, and that movement fatigues rigid pipe joints and buried copper. In September 2026 a damaged filter at the City's I-30 Water Treatment Plant cut production, and the City asked residents to limit outdoor watering to midnight to 6 a.m.; those restrictions were lifted on 25 September 2026.
The pipe era decides whether one fix ends the calls. Homes built from the 1940s to the 1960s commonly have galvanised supply lines corroding internally, and 1980s–90s homes can carry polybutylene that microfractures at fittings — so a repair that fixes one joint can leave the next one to fail, which is why the reroute option matters for older homes, and why a slab cut is the last resort, not the first.
That local knowledge shortens the repair and keeps it right-sized.
Southgate: 1970s brick ranches on slabs, where galvanised supply lines and clay soil make slab leak repair the usual call.
Downtown Mount Pleasant: Early to mid-20th-century homes where old supply lines make reroutes the better call more often than spot repairs.
Northwood: Newer north-side homes where a leak is more often a fitting or a service line than a slab line.
Eastwood Hills: Acreage homes east of town, where long service lines and private-lake lots make the service line the first suspect.
Stone Briar: Newer custom homes on Greenhill Road, where long pipe runs make locating the leak the first job.
Freezing nights and attic pipes: A pipe in an attic or an exterior wall splits at a hard freeze and shows up at the thaw. We check the exposed runs along with the repair.
Example — a typical call. The stories below are illustrative examples of the kind of leak repair calls we take, not a record of a specific past job.
IllustrativeThe thermal view for this leak repair job is generated from the photograph. It is not a measurement. Drag the handle to compare the before and after on this leak repair job, or use the arrow keys once it is focused.
Slab leak, spot repair
Before:A hot-water line leaked under the slab, and the floor had a warm spot.
After:We confirmed the location with acoustic and thermal methods, opened a small section of floor, and replaced the failed length of pipe.
The leak stopped, the line held at pressure, and the repair stayed small.
Slab leak, reroute
Before:A slab leak was found in a 1960s home, and the lines under the slab were old galvanised pipe.
After:We rerouted the line through the walls and the attic instead of breaking concrete over an old line that would fail again.
Hot water was back, the floor stayed intact, and the new line is accessible if it ever needs work again.
Freeze split, repaired and protected
Before:A pipe in an attic split at a hard freeze, and the damage showed up at the thaw.
After:We replaced the split section, checked the rest of the run for weak spots, and checked the exposed lines for protection.
The line holds at pressure, and the homeowner knows where the main shutoff is for the next freeze.
Leak problems we fix in Mount Pleasant, TX
Most leak repairs come down to a handful of failures. Knowing which one you are dealing with helps you choose between a spot repair and a reroute.
Slab leakLeak under the slab with no visible sourceA slab leak wastes water, raises the bill, and can undermine flooring and foundation. We repair the line through a small opening, or reroute it when breaking concrete is the worse call.
Pipe leak behind a wallSupply line leaking inside a wallA leak behind a wall wastes water and raises the bill without showing a puddle. We repair it through a small opening at the marked spot.
Service line leakLeak in the line from the meter to the houseA meter that runs with every tap off, or a soggy spot in the yard, points to the service line. We repair the failed section and test the line.
Freeze splitPipe split at a hard freezeA pipe in an attic or an exterior wall splits at a freeze and shows up at the thaw. We replace the split section and check the rest of the run.
Why homeowners call us first
The failed section replaced, the line pressure-tested before close-up, and the right fix for the home — spot repair or reroute.
Right fix for the home
A spot repair when the line is sound, a reroute when it is not. We explain both options when the leak is found, instead of selling the same fix for every home.
Tested before close-up
We test the repaired line under pressure before closing a wall or floor. If it does not hold, we find out while the access is still open.
Code-correct work
Every leak repair follows the 2024 International Plumbing Code adopted by the City of Mount Pleasant under Ordinance 2026-2. That matters at resale and at inspection, when a repaired leak shows in the paperwork.
No surprises on the invoice
We explain what the repair involves before we start, so the invoice matches the conversation you had before any work began.
What you receive with leak repair
Clear records from your leak repair job that you can keep and share.
Photo report
Before and after photos of the repair
Pressure log
Test reading showing the line holds
Repair note
Spot repair or reroute, and why
Parts list
What was replaced and why
Leak repair know-how built for Mount Pleasant, TX
That know-how shows up in the details: telling a galvanised line that will fail again from a copper line worth saving, and knowing when a reroute beats a slab cut. We have worked the full range of Mount Pleasant, TX plumbing, from 1950s homes with galvanised lines to new builds with PEX.
Galvanised lines
1940s–60s supply lines corroding internally.
Fails at a fitting or elbow
One joint fixed, the next fails
Reroute often the better call
Polybutylene lines
1980s–90s lines that microfracture at fittings.
Cracks at the fitting, not the run
Fittings replaced, not patched
Reroute ends the cycle
Buried copper
Copper under the slab, pitted by soil and movement.
Pits where soil runs acidic
Clay movement fatigues joints
Slab cut or reroute, by the line's age
Materials and tools we work with
Copper pipe
PEX tubing
PVC pipe
CPVC pipe
Code-approved fittings
Shutoff valves
Pressure gauges
Moisture meters
Service ZIP codes
We repair leaks across Mount Pleasant, TX, in these ZIP codes. Not listed? Call and ask — it only takes a minute.
Excellence service and diagnosis with courtesy and understanding of the whole issue. Went well beyond the norm to assist whereby I was able to resolve the problem. Especially considering it was a Saturday morning service call Thank you so much for your expert advice. Hot water again, yeah!!!
The service I received from NTP Plumbing in April was Absolutely EXCEPTIONAL! The technician/plumber name was Jeremy. He took care of my pipe issues efficiently and treated me like I was family. Jeremy had excellent customer service/interpersonal skills and he made sure the work done was in the spirit of excellence. I would be remiss if I didn't mention the wonderful service I received from the owner, James. He was so welcoming and genuinely kind. James was able to get me scheduled in so that my plumbing would be taken care of in a timely manner. Thank you NTP Plumbing for all you do and especially for the things I don't see.
I recently used NTP for a clogged kitchen drain. The job took longer than anticipated but James honored his quote and the work is guaranteed for 30 days. I would highly recommend NTP for any plumbing needs you may have.
This review is about a used-appliance sale, a separate line of business — not plumbing work.
They sell used appliances as well, fyi they r super nice ND very great prices! They delivered my fridge same day we're quick and nice. Thank y'all so much for being so efficient!!
They were very professional and courtious. Fixed all my plumbing problems
4.8 out of 5 from 16 Google reviews — 15 five-star and 1 one-star. Read all reviews for NTP Plumbing on Google.
Leak Repair Questions Mount Pleasant Homeowners Ask
It depends on where the leak is — under a slab, behind a wall, or in the service line — and whether a spot repair or a reroute is the better call. Call (903) 350-9085, describe where the leak was found, and we will explain what the repair covers before any work starts. We do not publish prices on this site.
For an older home, rerouting a line through the walls or the attic is often the better call than breaking concrete — especially when the lines under the slab are old galvanised pipe that will fail again. We explain both options when the leak is found.
Acoustic and thermal leak detection methods narrow down the source before anything is opened, and a pressure test confirms the finding. That is a leak detection visit — the repair starts once the location is known.
Yes. A pipe that split at a freeze is replaced at the failed section, and the rest of the run is checked for weak spots. Our guide to preventing frozen pipes explains how to protect exposed lines before the next hard freeze.
Call us at (903) 350-9085. We are open 24 hours, Monday to Sunday. Tell us where the leak was found and whether the water is off — that tells us whether the repair is a spot fix or a reroute. We serve Mount Pleasant, TX, including ZIP codes 75455 and 75456. If you are outside Mount Pleasant, call to confirm we can reach your address.