Faucet repair in Mount Pleasant, TX that stops the drip

Faucet repair is the professional fixing of a dripping or leaking faucet in a Mount Pleasant, TX home. A dripping faucet is easy to ignore and expensive to leave. NTP Plumbing repairs faucets across Mount Pleasant, TX — cartridges, seats and O-rings replaced, and the supply lines under the sink checked while we are there. Open 24 hours, Monday through Sunday.

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchenDrip fixedCartridge swappedSupply lines checked
  • Water off firstSupply shut before work starts
  • Parts on truckCommon cartridges carried daily
  • Dry testEvery joint checked before leaving
  • Old parts shownYou see what failed

What a faucet repair visit covers

Every faucet repair visit includes the diagnosis, the repair, and a test of the fixture and its connections. Here is what is standard on the ticket, and what we handle as an add-on when the inspection turns up something else.

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen
  • Full fixture diagnosis

    We open the faucet, inspect the cartridge, seats, and O-rings, and identify the actual failure point. You get a plain explanation of what broke and why before we quote the repair.

  • Cartridge and seat replacement

    Worn cartridges, scored valve seats, and hardened O-rings are replaced with matching parts. We carry common cartridges, seats, and O-rings on the truck.

  • Supply line and valve check

    Braided supply lines and shutoff valves are inspected for corrosion and seepage. Failing ones are replaced during the visit so a small leak does not turn into a cabinet flood later.

  • Aerator cleaning and flow test

    We clear mineral buildup from the aerator screen, flush the line, and confirm flow on both hot and cold. Pressure at the spout is tested before we pack up.

  • Leak test and cleanup

    Hot and cold are run through the full handle range while we watch the connections under the cabinet. Old parts are hauled off and the fixture is wiped down before we leave.

Homes and rentals

The approach is the same for a home and a rental — faucet repair is checked the same way in both. What changes is the access, the schedule, and who needs the paperwork for a faucet repair job.

For homes and rentals

Faucet problems show up at the worst time, usually before guests arrive or after a long day. We schedule around your household and fix the fixture while we are there when the parts are on the truck.

  • Kitchen faucet dripping overnight
  • Bathroom handle stiff or loose
  • Water pooling under the sink

For rentals and property managers

A leaking faucet in a rental unit costs water and tenant patience. We work around turnover schedules and document the repair for the property file.

  • Rental faucet running constantly
  • Turnover fixture repair needed
  • Supply line leak under counter

What faucet repair in Mount Pleasant, TX actually involves

A plain-language look at what Faucet Repair involves and when it is needed. The City of Mount Pleasant charges a $75 residential plumbing permit fee where a permit is required (inside city limits) — that is a City fee, not our price.

See how it works

Most faucet repairs come down to one worn part: a cartridge that no longer seals, a seat that has gone rough, or an O-ring that has hardened. The drip that follows is small and steady, and over a month it wastes a lot of water and stains the basin. We identify the faucet type, fit the matching part, and test the handle through its full travel before we leave.

While the water is off we check the shutoffs and supply lines under the sink — a valve that will not close turns the next repair into a flood, and older Mount Pleasant, TX homes often still have the original stops. Scale on the aerator is common with the city's lake-supplied surface water; we clean it and, if the build-up keeps coming back, we test the water before recommending anything further.

A drip is a worn part telling you it is done. Replace the part, not the faucet.

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen
What it is
Replacing the worn cartridge, seat or seal inside a faucet so it shuts off cleanly again.
When you need it
A steady drip, a stiff or loose handle, or water leaking at the base of the spout.
What to expect
The failed part replaced, the supply lines checked, and the handle tested before we leave.

How our faucet repair visit runs

No mystery, no waiting around all day. Here is the sequence from your first call to the final test.

  1. Call and schedule

    You call, tell us what the faucet is doing, and we book a window that fits your day. We ask the brand and age of the fixture up front so the truck rolls with the right cartridge and seat kit on board.

    • Call
    • Schedule
    • Brand check
    Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen
  2. Diagnose on site

    We shut off the supply, open the faucet, and inspect the cartridge, seats, and supply lines. You get a plain explanation of what failed and a quote before any part comes out of the box.

    • Shutoff
    • Inspect
    • Quote
    Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen
  3. Repair or replace

    We install the new cartridge or valve, apply Teflon tape or pipe dope on the threads, and torque the supply connections to spec so nothing weeps under the sink.

    • Replace
    • Seal
    • Torque
    Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen
  4. Test and check

    We run hot and cold, cycle the handle through its full range, and watch the connections under the cabinet with a flashlight. If we see a single drop, we do not call the job done.

    • Run hot
    • Run cold
    • Watch joints
    Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen
  5. Clean up and walk through

    We wipe down the fixture, haul off the old parts, and show you what we replaced. You get the brand and part number in case you ever need a matching cartridge down the road.

    • Wipe down
    • Haul off
    • Walk through
    Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen

Tools and methods we bring to the job

Move across a circle, or focus it and press Enter, for an illustrative thermal view of this faucet repair photograph.

  • Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen

    Pipe wrench

    Used to hold valve bodies and loosen supply connections without twisting the fixture.

  • Plumber soldering a copper pipe joint under a kitchen sink in a Mount Pleasant, TX home

    Teflon tape and pipe dope

    Applied to threaded connections so supply fittings seal clean and do not weep after the repair.

  • NTP Plumbing technician with tools at a Mount Pleasant, TX home

    Pressure gauge

    Checks line pressure at the shutoff so we know the fixture is not being stressed by high pressure.

  • Plumber using leak detection equipment in a Mount Pleasant, TX home

    Leak detection microphone

    Traces hidden supply-line leaks behind cabinets and walls when the source is not visible.

  • Plumber replacing old pipe with new PEX in a Mount Pleasant, TX home

    push-to-connect and expansion fittings

    Used for quick, code-correct repairs on copper and PEX supply lines feeding the faucet.

Thermal views are illustrative, generated from photographs of faucet repair work in Mount Pleasant, TX.

Methods

  • Hand tools

    Cartridge pullers, seat wrenches, and inspection mirrors for working inside the valve body.

  • 2024 International Plumbing Code adopted by the City of Mount Pleasant (Ordinance 2026-2, effective 20 January 2026) compliance for faucet repair work

    Every repair is done to IPC standards, including proper shutoff valve placement and supply-line sizing, so the work passes inspection and holds up.

  • International Plumbing Code compliance

    Where IPC applies, we follow its requirements for fixture connections and valve installation. We do not cut corners on code items to save time.

  • Pressure testing

    After the repair, we run hot and cold through the full handle range and watch the connections under the cabinet. A repair is not finished until the joint is dry.

  • Repair-or-replace assessment

    We inspect the fixture body, finish, and parts availability before recommending a path. If repair will not last, we say so and quote a replacement instead.

When to call for faucet repair

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen

Kitchen drip

A kitchen faucet drips all night and the basin is stained.

The cartridge had worn through. We fitted the matching cartridge, cleaned the scaled aerator, and checked the shutoffs under the sink.

Outcome: A silent tap, a clean basin, and shutoffs that actually close.

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen

Bathroom shutoff

The bathroom faucet drips and the shutoff under the sink will not turn.

We replaced the cartridge and the seized stop at the same visit, so the next repair will not need the main shut off.

Outcome: A working faucet and a working shutoff, both tested before we left.

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen

Burst supply line

A supply line under the sink split and the cabinet floor is wet.

We shut the water off, replaced the failed line and the stop, and dried the cabinet. The faucet itself was fine and stayed.

Outcome: A dry cabinet and a line that holds at pressure.

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen

Rental turnover

A rental needs the kitchen faucet fixed before the new tenant moves in.

We coordinated access with the property manager, replaced the cartridge and seat, and checked the trap and supply lines while we were there.

Outcome: A clean, quiet faucet ready for move-in day.

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen

Old valve and faucet

A stiff handle that takes two hands to turn.

The cartridge and the seat were both worn. We replaced both and the handle moves with one finger again.

Outcome: A faucet that works the way it should, with no drip behind it.

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen
DowntownSouthgateNorthwood

How faucet repair runs in Mount Pleasant, TX

Faucet calls in Mount Pleasant, TX split by house age. In Downtown homes and Southgate's 1970s ranches, the faucets are often original and the parts are worn through — cartridges, seats and washers all at once. In newer Northwood and Stone Briar homes, the fault is usually a single cartridge or a scaled aerator.

Rental turnovers are a steady source of faucet work: a dripping kitchen tap is the first thing a new tenant notices. If you want to try the simple checks first, our guide on how to fix a dripping faucet in your Mount Pleasant, TX home walks through what is safe to look at — and when to call us instead.

  • Downtown Mount Pleasant, TX: Early-to-mid-20th-century homes where faucets are often original. Worn cartridges and seats are the usual repair, and the shutoffs under the sink often need attention too.
  • Southgate: 1970s brick ranches with aging fixtures. Drips and stiff handles are common, and a repair usually means new internals rather than a new faucet.
  • Northwood: Newest in-town subdivision. Faucets here are newer, so the fault is usually one cartridge or a scaled aerator.
  • Lake Bob Sandlin area: Lakefront homes where fixtures see heavy seasonal use. We check the supply lines and shutoffs at the same visit, since a lake house sits empty between stays.
  • Rentals and turnovers: A dripping tap is the first thing a new tenant notices. We repair faucets between tenancies and check the stops so the next repair is not a flood.
  • Scale on the aerator: White build-up on the aerator is a sign to test the water, not a reason to buy equipment on a guess. We test first and recommend from the result.
See where we work
  • Walk-through and plain explanation of the failure
  • Drop cloths down and cabinet protected
  • Final leak test and parts walk-through

From problem to finished result

Example — a typical call. The stories below are illustrative examples of the kind of faucet repair calls we take, not a record of a specific past job.

Plumber replacing a dripping faucet in a Mount Pleasant, TX kitchen
IllustrativeThe thermal view for this faucet repair job is generated from the photograph. It is not a measurement. Drag the handle to compare the before and after on this faucet repair job, or use the arrow keys once it is focused.
  • Kitchen faucet drip stopped in one visit

    Before: A Northwood homeowner had a kitchen faucet dripping steadily. The cartridge was scaled solid from hard water, and the shutoff valve under the sink was starting to corrode. The sink basin had a mineral stain ring around the drain.

    After: We replaced the cartridge and the shutoff valve. The drip stopped completely, the handle moved smoothly through its full range, and the supply connections tested dry. The homeowner cleaned the stain ring with the fixture no longer adding to it.

    Run the faucet through its full hot and cold range weekly to keep the cartridge moving, and wipe the spout dry after use to slow mineral buildup.

  • Bathroom faucet that would not shut off

    Before: A Southgate bathroom faucet ran a steady stream into the bowl overnight. The valve seat was scored and the cartridge had hardened O-rings. The homeowner had been shutting off water at the main every night to stop the waste.

    After: We replaced the valve seat and cartridge, checked the supply lines, and tested the fixture through its full range. The faucet shut off clean with no drip, and the homeowner stopped shutting off the main.

    Do not force a stiff handle. If it starts to stick, call for a cartridge check before the valve body cracks.

  • Supply line burst under a kitchen sink

    Before: A braided supply line burst under a rental kitchen sink near the US 271 retail corridor, soaking the cabinet floor. The shutoff valve was old and would not close fully, so the water had to be shut off at the main.

    After: We replaced the shutoff valve and the failed supply line, dried the cabinet area, and tested the fixture. Water was back on within the visit, and the cabinet floor was dry. The tenant had a working kitchen again.

    Check braided supply lines every couple of years for corrosion or bulging, and replace them before they fail.

Faucet problems we fix before they spread

Most faucet calls fall into a handful of patterns. Here is what we see most in Mount Pleasant and what happens if you let it ride.

  • Constant dripConstant drip from the spoutA steady drip wastes a lot of water over a year, stains the basin, and keeps the cartridge wearing down until the handle stops working altogether. We replace the failed cartridge or valve seat, test the handle travel, and confirm the spout is dry.
  • Water under sinkWater pooling under the sinkA leaking supply line or shutoff valve can rot the cabinet floor and warp the base within weeks, turning a small repair into a cabinet rebuild. We trace the leak to the supply line, valve, or drain connection, replace the failed part, and dry-test every joint before we leave the cabinet.
  • Stiff handleHandle stiff or hard to turnA sticking handle usually means mineral scale or a failing cartridge. Forcing it can crack the valve body and turn a repair into a full fixture replacement. We disassemble the valve, clear the scale, and replace the cartridge if it is scored. The handle is tested through its full range before we call it done.
  • Low pressureLow water pressure at one faucetA clogged aerator or failing cartridge cuts flow to a trickle and can mask a larger supply-line issue further back in the run. We clean the aerator, flush the line, and check pressure at the shutoff. If the restriction is behind the wall, we scope it and quote the line repair.

Why handle the leak now

A faucet that shuts off clean and stops wasting water.

  • Stop the water waste

    A faucet dripping once per second wastes a lot of water over a month. We replace the failed cartridge or seat so the flow stops completely, and you can watch the meter settle before we leave the driveway.

  • Protect the finish

    Constant moisture under the base eats chrome and pits the deck. Fixing a leaky faucet early keeps the fixture looking new and prevents mineral staining around the drain and backsplash.

  • Avoid cabinet damage

    Supply-line leaks quietly rot the cabinet floor. During every faucet repair visit we check the shutoff valves and braided lines, replacing any that show corrosion so a small drip never becomes a cabinet rebuild.

  • Keep water pressure steady

    A clogged aerator or failing cartridge cuts flow to a trickle. We clear the screen, flush the line, and confirm pressure at the spout so both hot and cold sides run the way they should.

What you receive with faucet repair

Clear records from your faucet repair job that you can keep and share.

Part note

Brand and part number of what was replaced

Job summary

What failed and what was done

Photo record

Before and after of the fixture area

Next-step note

Any follow-up the fixture needs

Repair versus replace: what the fixture tells us

The right call depends on the body, the finish, and whether parts are still made for the model.

Repair

Body and finish are sound, only the cartridge or seals failed.

  • Under 15 years old
  • Parts still made
  • Finish intact

Replace

Body is cracked, finish is pitted through, or parts are gone.

  • Cracked valve body
  • Discontinued model
  • Finish worn through

Check first

Shutoff valves and supply lines decide whether a repair holds.

  • Valve closes fully
  • Lines not bulging
  • No corrosion

What we work with

  • Cartridges
  • Valve seats
  • O-rings
  • Shutoff valves
  • Copper pipe
  • PEX tubing
  • Teflon tape

Service ZIP codes

A list like this tells people straight away whether we cover their street for faucet repair. Not listed? Call and ask — it only takes a minute.

  • 75455
  • 75456

Areas we serve in Mount Pleasant, TX

Based in Mount Pleasant and covering the places around it. Pick one for local details.

View all service areas

What customers say about our faucet work

Excellence service and diagnosis with courtesy and understanding of the whole issue. Went well beyond the norm to assist whereby I was able to resolve the problem. Especially considering it was a Saturday morning service call Thank you so much for your expert advice. Hot water again, yeah!!!

SamE Embras Jr
5 stars · 2 years ago · Google review

The service I received from NTP Plumbing in April was Absolutely EXCEPTIONAL! The technician/plumber name was Jeremy. He took care of my pipe issues efficiently and treated me like I was family. Jeremy had excellent customer service/interpersonal skills and he made sure the work done was in the spirit of excellence. I would be remiss if I didn't mention the wonderful service I received from the owner, James. He was so welcoming and genuinely kind. James was able to get me scheduled in so that my plumbing would be taken care of in a timely manner. Thank you NTP Plumbing for all you do and especially for the things I don't see.

Ozie Hollingsworth
5 stars · 2 years ago · Google review

I recently used NTP for a clogged kitchen drain. The job took longer than anticipated but James honored his quote and the work is guaranteed for 30 days. I would highly recommend NTP for any plumbing needs you may have.

No Name
5 stars · 2 years ago · Google review

This review is about a used-appliance sale, a separate line of business — not plumbing work.

They sell used appliances as well, fyi they r super nice ND very great prices! They delivered my fridge same day we're quick and nice. Thank y'all so much for being so efficient!!

Brittney Moss
5 stars · 2 years ago · Google review

They were very professional and courtious. Fixed all my plumbing problems

Tim Griffin
5 stars · 4 years ago · Google review

4.8 out of 5 from 16 Google reviews — 15 five-star and 1 one-star. Read all reviews for NTP Plumbing on Google.

All reviews
4.8 out of 5 · 16 Google reviews

Faucet repair questions we hear on the phone

Usually a worn cartridge, seat or O-ring that no longer seals. The part is small and the fix is straightforward — we match the part to your faucet type and test the handle through its full travel before we leave.

Yes, in most cases. A new cartridge or seat restores the seal, and the faucet body itself is often fine for years. If the body is cracked or the finish is gone, we will say so and lay out the replacement option.

A faucet dripping once per second wastes a lot of water over a month. It also stains the basin and keeps the cartridge wearing down. Fixing the drip is one of the cheapest water savings in the house.

Yes. While the water is off we check the shutoffs and supply lines under the sink. A valve that will not close turns the next repair into a flood, so we flag it and quote a replacement if needed.

Get your faucet repair in Mount Pleasant, TX scheduled

Call (903) 350-9085 and tell us which faucet is dripping. We will fix the worn part and check the supply lines while we are under the sink. Open 24 hours, Monday–Sunday.

Get in Touch with NTP Plumbing

Call (903) 350-9085 any time — NTP Plumbing is open 24 hours, Monday–Sunday. Tell us what you are seeing and we will talk you through shutting the water off if you need to. We serve Mount Pleasant, TX, including ZIP codes 75455 and 75456.

Thanks. Your request is in and the team will follow up shortly.