All 28 plumbing services in Mount Pleasant, TX
From a running toilet to a full sewer line replacement, we cover the plumbing services in Mount Pleasant, TX that properties need. Our trucks carry the fittings, valves, and tools to handle most jobs in one visit, and we stock parts for tank and tankless water heaters. The City of Mount Pleasant charges a $75 residential plumbing permit fee where a permit is required (inside city limits) — that is a City fee, not our price.
- Written scope firstYou see the plan before work starts
- Floors protectedDrop cloths go down before tools come out
- Parts matched to pipeFittings chosen for the material in place
- Test before we leaveEvery repair is checked under pressure
Plumbing Services in Mount Pleasant, TX
From a running toilet to a full sewer line replacement, these are the 28 plumbing services we offer in Mount Pleasant, TX.
Emergency Plumbing
A burst pipe after hours or a sewer backup before a holiday needs a fast answer.
Drain Cleaning
Slow drains and recurring clogs usually mean buildup or root intrusion deeper in the line; drain cleaning and sewer repair cover both.
Sewer Line Repair
A cracked or root-damaged sewer line causes backups and soggy spots in the yard — we camera it first. Sewer line repair: we locate the break, repair the section, and test the line before we cover it back up.
Sewer Line Replacement
Sewer line replacement: when a line is too far gone for spot repair, we replace it with PVC pipe sized for your home's load.
Water Heater Repair
No hot water, rusty water, or a puddle under the tank means the heater needs attention. We repair tank and tankless units.
Water Heater Installation
Replacing an old tank? We size the new unit — tank or tankless — to your household, set it level, and connect the supply lines and shutoff valves so it runs efficiently from day one.
Gas Line Repair
Gas lines for water heaters, stoves and outdoor living. If you smell gas, leave the building and call 911 and your gas utility first, then call us.
Leak Detection
A spike in the water bill with no visible leak often points to a slab leak. We use a leak detection microphone and pressure gauge to pinpoint it without guesswork.
Leak Repair
From a pinhole in a copper pipe to a failed supply line, we find the source and fix it.
Pipe Repair
Frozen pipes, corrosion, and shifting soil crack pipe over time. We repair the damaged section, pressure-test it, and check nearby fittings for the same problem.
Pipe Replacement
When repairs pile up on old galvanized or cast iron pipe, replacement saves money long term. We replace runs with PEX tubing or copper and keep the mess contained.
Repiping
Whole-home repiping fixes low water pressure and rusty water caused by failing pipe. We plan the route, protect your floors, and restore water before we leave in most cases.
Faucet Repair
A dripping faucet wastes water and drives up the bill. We replace cartridges, seats, and O-rings and check the supply lines while we're under the sink.
Faucet Installation
New faucet installs go smoother with the right supply lines and a clean seal. We set the fixture, connect the shutoff valves, and test for leaks before we leave.
Toilet Repair
A running toilet can waste hundreds of gallons a day. We replace flappers, fill valves, and wax rings and check the flange for cracks that cause leaks at the base.
Toilet Installation
We pull the old toilet, inspect the flange, set a new wax ring, and level the bowl. New installs are tested for a tight seal.
Shower Repair
Leaky shower valves and worn cartridges cause drips and temperature swings. We repair the valve, replace the cartridge, and check the shower pan for hidden leaks.
Shower Installation
New shower installs need proper waterproofing and drain slope. We set the pan, connect the valve and trim, and test the drain before the tile goes in.
Bathtub Repair
A tub that leaks at the overflow or drain wastes water and damages the floor below. We repair the drain assembly and check the overflow gasket for a tight seal.
Bathtub Installation
We set new tubs level, connect the drain and overflow, and check the supply lines. Proper support underneath prevents flexing and cracks down the road.
Sink Repair
Clogged or leaking sinks often trace back to the P-trap or a failing supply line. We clear the clog, replace the trap, and check the shutoff valves.
Sink Installation
New sink installs include setting the basin, connecting the drain and supply lines, and sealing the rim. We test for leaks and make sure the water drains fast.
Garbage Disposal Repair
A humming disposal that won't turn usually means a jam or a failed motor. We clear the jam, check the wiring, and reset or replace the unit as needed.
Garbage Disposal Installation
We mount the new disposal, connect the drain lines, and check for leaks at every joint. Proper sizing and a tight seal keep it running quietly.
Water Softener Installation
We test your water first, then install and set up a softener sized to your household and connect it to the main line correctly.
Water Softener Repair
A softener that stops softening usually has a worn resin bed or a stuck valve. We diagnose the unit, replace the failed parts, and test the water again.
Water Filtration System Installation
We install whole-home and under-sink filtration systems, connect them to the supply line, and test the flow and pressure.
Water Filtration System Repair
When filters clog or pressure drops, we replace the cartridges, check the housing for leaks, and make sure the system delivers clean water at full flow.
How a Plumbing Call Works
You call, we listen, and we send the right person. No call center, no runaround. Here's what happens from the first ring to the final test.

Call and Describe
You tell us what's happening: where the water is, what it smells like, how long it's been going on. We ask a few questions to figure out what tools and parts to bring.

We Arrive and Diagnose
The technician inspects the problem, runs a camera or pressure test if needed, and explains what's wrong in plain language. Call for a quote before work starts.

We Fix It
We do the repair with the right materials, whether that's soldering copper, crimping PEX, or pulling a toilet to replace a wax ring. We protect your floors and clean up as we go.

Test and Walk Through
Before we leave, we test the repair under pressure, check for leaks, and show you what we did. If something needs watching, we tell you what to look for.
Plumbing Services Questions in Mount Pleasant, TX
Here are the questions we hear most often from customers about our services. If yours isn't here, call us and we'll give you a straight answer about that service.
Still have a question?
Describe what you are seeing and we will point you to the right next step for the service you need.
(903) 350-9085Start with drain cleaning for a slow or blocked fixture drain. If several drains back up at once, the problem is usually in the main sewer line — we run a sewer camera to see the break or root intrusion before recommending sewer line repair or replacement.
Yes. We repair and install tank and tankless water heaters. Descaling frequency for a tankless unit depends on your water test — with harder water, about once a year; with softer water, every couple of years.
If you smell gas, leave the building and call 911 and your gas utility first, then call us at (903) 350-9085. Do not flip switches or light anything while you leave.
Yes — we test your water first, then size the softener or filtration system to your household and connect it to the main line.
Yes. With a median build year of 1978 and 54% of Mount Pleasant, TX homes built before 1980, galvanised and cast iron pipe is common here. We repair the failing sections, or repipe the home in PEX or copper when repairs keep piling up.
Need a Plumber in Mount Pleasant, TX? Call Now
(903) 350-9085A leak won't wait and neither should you. Call NTP Plumbing for service any time — open 24 hours, call for a quote, and a plumber who fixes it right. We're local and ready to help.
Get in Touch with NTP Plumbing
Call NTP Plumbing at (903) 350-9085 for any of the 28 services on this page. We are open 24 hours, Monday–Sunday, across Mount Pleasant, TX, including ZIP codes 75455 and 75456. If you are outside Mount Pleasant, call to confirm we can reach your address.
- Phone
(903) 350-9085 - Hours
Open 24 hours — Monday–Sunday - Find us
NTP Plumbing on Google Maps
Mount Pleasant, TX, USA


